OE Ref.:
4L2Z-1A150-BA
Commercial Name:
Schrader Clamp-in Gen 2/3 Ford 433MHz Chrysler Gen2 Tx_A1
OEM Sensor P/N:
4L2Z-1A150-BA
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
Nm
Screw Torque:
-- Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1081
20004
20004
Commercial Name:
TPMS Service Pack
Note:
20004 replaces 20002 going forward from March 1, 2018
Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Stationary Relearn
Relearn Description1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to OFF position.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position
7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE. Place relearn magnet on LF sensor until horn sounds.
8. Proceed as in step 6 for the next 3 sensors in the following order: RF, RR, and LR.
9. After training LR the horn will sound and message center will display TIRE TRAINING MODE COMPLETE, if equipped.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.